CART ( 0 )

Your cart is empty!

Mi WiFi PowerLine Adapter

WiFi in your electrical wiring

*ADSL or cable modem is required, supports mainstream routers in the market
*WiFi PowerLine have host and sub machine combination

Rs 6000

Extend Blazing Fast Wi-Fi

Expand your Wi-Fi network using your home’s existing powerlines. Plug in the Mi WiFi PowerLine Adapter
to transmit an internet connection to any area in your home and share that connection with all of your
favorite wired and wireless devices. A unified network keeps your connection stable,
even as you move around the house.

  • Signal penetration to solve the large size of the WiFi coverage

  • A host and multi-sub up to 7 sets of sub-machine

  • Extensive adaptation supports mainstream routers in the market

  • Seamless roaming 2.4G 300Mbps WiFi

Mi WiFi PowerLine Adapter Introduction

Leap through walls and floors

Relying on the power line transmission network signal technology, Mi Electric Power Cat Wifi
Repeater boosts the range of your existing WiFi & creates a stronger signal in hard-to-reach
areas to easily clean all of the non signal disctrict in your house.

Mi WiFi PowerLine Adapter make full use of power line communication
technology to convert ethernet signals to low frequency signal, combined
with OFDM (Orthogonal frequency-division multiplexing) and QAM
modulation and demodulation technology.

Stable Connections
Thanks to 2×2 MIMO

Mi Electric Power Cat Wifi Repeater have host and sub machine
combination. Sub Machine have 2x2 antenna, equivalent to the
mainstream router 300Mbps wireless transmission rate. Stable
performance, better coverage. The convenient wall-plug design
is compact and simple, easily blending into your home decor.

Easy configuration
Reliable Networking

Set up your powerline network and start enjoying fast,
seamless wired/wireless connection in minutes, support
one-to-seven, (one host, pairing with 7 sub-machines)
powerline devices need to be connected to the same
electrical circuit and must be deployed in sets of
two or more.

*Work with 3 sub-machine at the same time

  • 2 Bedroom

    Covering about 80 square meters

  • 3 Bedroom

    Covering about 120 square meters

  • LOFT

    Two layers of total coverage of about 150 square meters

Plug, Pair, and Play

Ditch the complicated setup process for good. With Mi WiFi powerLine adapter,
all it takes is three steps to get online. First, connect your powerline host to the
router. Then, plug in the sub-machine wherever you need extra coverage. Add
Mi WiFi powerLine, using Mi Home app for configuration, your existing Wi-Fi
settings will be synchronized automatically.

*ADSL or cable modem is required

  • Connect host to the router
    then turn on the power

  • Plug WiFi extender in any desired
    power outlet

  • Open Mi Home App
    Follow the prompts to set up

Pretty and Practical
Functional Elegance

A streamlined minimalist design through the Mi WiFi hardware design and
experience fits perfectly in any home, no annoying cables to route,
keep your home clean. Rounded corners to ensure safety for everyone
in the family, unhindered performance.

Break the Powerline Speed Limit

Mi WiFi PowerLine Adapter
  Mi WiFi PowerLine Adapter - Host Mi WiFi PowerLine Adapter - Sub-machine
Size
Hardware
Processor
QCA6410
ROM
1MB NorFlash
Processor
QCA9533
ROM
16MB NorFlash
RAM
64MB DDR2
2.4G WiFi
2X2 (Supports IEEE 802.11N protocol, speed up 300Mbps)
Antennas
External omnidirectional high-gain antenna 2 (2.4G maximum gain 3dBi)
Cooling
Nano-carbon foil
Interface
1x LAN port, 10/100Mbps (Auto MDI/MDIX)
1x Red/Blue/Yellow LED indicator
1x Reset button
1x LAN port, 10/100Mbps (Auto MDI/MDIX)
1x Red/Blue/Yellow LED indicator
1x Reset button
Wi-Fi
No WiFi
2.4GHz
Radio channel
2.4GHz Channel: 1,2,3,4,5,6,7,8,9,10,11,12,13
Modulation type
11b:DSSS:DBPSK(1Mbps),DQPSK(2Mbps),CCK(5.5/11Mbps)
11g:OFDM:BPSK(6/9Mbps),QPSK(12/18Mbps),16QAM(24/36Mbps),64QAM(48/54Mbps)
11n:MIMO-OFDM:BPSK,QPSK,16QAM,64QAM
Receiver sensitivity
11Mbps:≤-90dBm,54 Mbps:≤-72dBm,HT20 MCS7:≤-69dBm,
HT40 MCS7:≤-66dBm
Software
OS system
MiWiFi OS (Based on OpenWRT) Support Android, iOS APP management
Language support
Simplified Chinese
Wireless encryption
WPA-PSK/WPA2-PSK encryption, wireless access control (black and white list)
Advanced features
Auto pairing, Wi-Fi Roaming, Online terminal view
Compatibility
Android, iOS
Protocol
HomePlugAV, 802.3/3u
HomePlugAV, 802.3/3u, IEEE 802.11b/g/n
Environmental requirements
Operating temperature
0-40°C
Relative humidity
10%-90%RH(noncondensing)
Nonoperating temperature
-40-70°C
Storing humidity
5%-90%RH(noncondensing)
Power consumption
1.8W
Operating temperature
0-40°C
Relative humidity
10%-90%RH(noncondensing)
Nonoperating temperature
-40-70°C
Storing humidity
5%-90%RH(noncondensing)
Power consumption
4.2W

Copyright © 2018 Xiaomi Store Pakistan. All Rights Reserved